Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
US Plastic Corporation 1/4" ID x 3/8" OD x 0.062" Wall Natural Polypropylene Tubing
Polypropylene is ideal for transferring hot liquids or gases, or where higher temperatures and pressures are expected. It has many uses in manufacturing operations where extreme resistance to acids and alkalis is required.
Andwin Scientific EXTEN SET 21INL 2.4MLVL 50CS
The Baxter extension set with male luer lock adapter has an approximate length of 21 inches and an approximate volume of 2.3 mL. This product is sold in a case of 50.
Peristaltic Pump Tubing, PVC, 2-tag, Glass Expansion. For large pump white/white, 1.02 mm with flared ends. Inexpensive all-around tubing for general applications. Pack of 6
Contour Flared End PVC Pump Tube 2tag 1.02mm ID White/White (PKT 6).Tag Colors: White/WhiteID mm: 1.02Wall Thickness mm: 0.86OD mm: 2.74Overall Length: 455mm (152mm spacing between tags)Number of Tubes Per Pack: 6Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon R3603/R3607 or equivalent.Special Properties: Inexpensive all-around tubing for general laboratory applicationsChemical Compatibility: Excellent for aqueous solutions of the following acids and concentrations, up to 35% Nitric Acid, up to 37% Hydrochloric Acid, up to 25% Hydrofluoric Acid, up to 30% Hydrogen Peroxide.Limitations: Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
AVANTOR MASTERFLEX (VWR LLC) High-Density Polyethylene (HDPE) Tubing, 1/8 x 1/4"", 100 ft/pack
Applications: General-purpose lab and industrial use. Characteristics: Low moisture absorption, good chemical and corrosion-resistance, high tensile strength. Certifications: None. Temperature range: ¿103 to 151¿F (¿75 to 66¿C) Sterilize: Autoclave.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, C-Flex, Clear, 3/8"" ID x 5/8"" OD; 25 ft
Applications: Pharmaceutical, biotech, and general-purpose lab uses requiring high performance. Economical alternative to platinum silicone. Characteristics: Exceptional tensile and tear strength, good biocompatibility, excellent chemical resistance, low gas permeability, and a smooth surface. Transparent. Certification: Product is manufactured in accordance with Part 820 Quality System Requirements (GMP); and meets USP Class VI. Temperature range: -40 to 275¿F (-40 to 135¿C) Sterilize: Autoclave, ethylene oxide, or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) Microbore PTFE Tubing, 0.032""ID x 0.056""OD, 100 ft/roll
Microbore PTFE Tubing, 0.032"ID x 0.056"OD, 100 ft/roll, Use this translucent tubing in extreme temperatures and in harsh chemical environments. It's chemically inert, has low permeability, and has the lowest friction coefficient of any tubing. Temperature range is ¿400 to 500¿F(¿240 to 260¿C); melts at 620¿F(327¿C). Tensile strength is 2500 to 4000 psi. PTFE tubing resin is UL-recognized and complies with FDA (21 CFR 177.1550) and USP Class VI requirements.
AVANTOR MASTERFLEX (VWR LLC) Microbore tubing, 0.050"" x 0.090""OD, 100 ft/roll
Microbore Tubing, 0.050" x 0.090"OD, 100 ft/roll. Ideal for general laboratory and pharmaceutical useMicrobore tubing has a 0.05¿ (1.27 mm) inner diameter. Formulation: Tygon ND-100-80Applications: General laboratory and pharmaceutical use, especially with precision injection or dispensing applications. Also excellent with low-flow peristaltic pump applications.Characteristics: Extremely flexible. Non-toxic; nonpyrogenic; biocompatible. Crystal clear.Certifications: Resin meets USP Class VI requirements.Temperature range: ¿25 to 185¿F (¿31 to 85¿C)Sterilize: Autoclave, ethylene oxide, or gamma irradiation.
Cole-Parmer LDPE Rectangular Mobile Tub with Lid, 28 gal; 1/Pk
Tubs are made of low-density polyethylene (LDPE). Rugged caster frame supports heavy loads. Three-inch diameter casters make rolling easy. Container and casters can be removed from zinc-plated frame for cleaning. Tubs include polyethylene cover. NSF certified; USDA approved.
AVANTOR MASTERFLEX (VWR LLC) Tygon ACF00028 E-3603 Non-DEHP Nominal Lab Tubing, 3/8"" ID x 9/16"" OD; 50 ft/Pk
Formulation - E3603 Applications:General laboratory use. Characteristics: Long life, won¿t age or oxidize, able to bend to sharp radius curves, and easily works with fittings. Transparent. Temperature range: ¿58 to 165¿F (¿50 to 74¿C)
Across International Ai 1/2" Insulated Chiller Translucent Silicone Tubing - 6 Ft
Ai 1/2" insulated chiller silicone tubing. Inner tubing comes in translucent natural color for visual contact with the flow, able to resist temperature from -60C to 100C. Silicon tubing ID: 5/16", OD: 11/16" Insulation ID: 1/2", OD: 1.2"